Bambu Lab A1 Combo

Bambu Lab

A1 mini Combo

Multi-Color Printing

Plug-N-Play

Active Flow Rate Compensation

Full Auto Calibration

Active Motor Noise Cancelling

High Speed Precision

Multi-Color Printing

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Active Flow Rate Compensation

The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Plug-N-Play

The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.

Active Motor Noise Cancelling

The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision）

Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

A1 mini Tech Specs

Item A1 mini Specification

Body Build Volume(W*D*H) 180*180*180 mm³

Toolhead Hot End All-Metal

Nozzle Stainless Steel

Max Hot End Temperature 300 °C

Nozzle Diameter 0.4 mm (Included)

0.2 mm, 0.6 mm, 0.8 mm

Heatbed Build Plate Bambu Textured PEI Plate (Included)

Bambu Smooth PEI Plate

Max Build Plate Temperature 80°C

Speed Max Speed of Tool Head 500mm/s

Max Acceleration of Tool Head 10m/s²

Supported Filament PLA, PETG, TPU, PVA Ideal

ABS, ASA, PC, PA, PET,

Carbon/Glass Fiber Reinforced Polymer Not Recommended

Sensors Monitoring Camera Low Framerate Camera (Up to 1080P)

Timelapse Supported

Filament Run Out Sensor Yes

Filament Odometry Yes

Power Loss Recover Yes

Filament Tangle Sensor Yes

Physical Dimensions A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg

A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg